Envoy 4WD V8-5.3L (2007)
13. Remove the positive battery cable terminal nut (2) from the starter.
14. Remove the positive battery cable terminal (3).
15. Remove the positive battery cable clip (1) from the bracket.
16. Remove the positive battery cable from the conduit.
Installation Procedure
1. Install the positive battery cable to the conduit.
2. Install the positive battery cable terminal (3).
Notice: Refer to Fastener Notice.
3. Install the positive battery cable terminal nut (2) to the starter.
Tighten the nut to 9 N.m (80 lb in).
4. Install the positive battery cable clip (1) to the bracket.