Envoy 4WD V8-5.3L (2007)
Transfer Case Actuator: Service and Repair
NVG 226-NP8 - Transfer Case
Transfer Case Motor/Encoder Replacement (TrailBlazer EXT, Envoy XL, Envoy XUV)
Transfer Case Motor/Encoder Replacement (TrailBlazer EXT, Envoy XL, Envoy XUV)
Removal Procedure
Important: Before the motor/encoder is removed, ensure that the motor/encoder is in the 2HI position.
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the transfer case shield, if equipped. Refer to Transfer Case Shield Replacement.
3. Disconnect the motor/encoder electrical connector (1).
4. Remove the motor/encoder mounting bolts.