Envoy 4WD V8-5.3L VIN M (2005)
License Plate Bracket: Service and Repair
License Plate Pocket Replacement (Envoy XUV)
Removal Procedure
1. Swing open the endgate.
2. Remove the endgate trim panel.
3. Remove the inner panel reinforcement.
4. Remove the endgate lock cylinder.
5. Disconnect the electrical connector (2) from the swing function handle.
6. Remove the license plate pocket wiring harness retainers from the endgate.
7. Disconnect the main license plate pocket electrical connector (1).
8. Remove the nuts retaining the license plate pocket to the endgate.
9. Remove the license plate pocket from the endgate.
Installation Procedure