Envoy 4WD V8-5.3L VIN M (2005)
19. If equipped with OnStar(R) perform the following procedure:
1. Pass the cable through the hole in the carpet.
2. Install the navigation antenna cable (2) to the communication interface module (1).
3. Install the cover on the communication interface module.
20. Install the carpet on the floor.
21. Install the left/right upper body lock pillar trim panels.
22. Install the left/right lower body lock pillar trim panels.
23. Install the upper body lock pillar trim cover.
24. Install the rear floor panel assembly.
25. Install the rear seat and midgate rest.
26. Install the jack and tool stowage container bracket.
27. Install the left/right rear side door sill plates.
28. Install the left rear seat.
29. Connect the negative battery cable.