Envoy 4WD V8-5.3L VIN M (2005)
4. Install the front latch (1) to the front latch slide.
5. Install the fastener retaining the front latch (1) to the front latch slide.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the front latch retainer to 0.75 N.m (6 lb in).
6. Install the moveable roof panel guide assembly.
7. Install the moveable roof panel actuator/motor.
8. Install the moveable roof panel.
Moveable Roof Panel Latch Spring Replacement - Rear
MOVEABLE ROOF PANEL LATCH SPRING REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Open the moveable roof.
2. Remove the moveable roof panel locator.
3. Remove the moveable roof panel latch spring (1) out of the channel of the moveable roof frame assembly.
INSTALLATION PROCEDURE
1. Install the moveable roof panel latch spring (1) into the channel of the moveable roof frame assembly.
2. Install the moveable roof panel locator.
3. Close the moveable roof.
Moveable Roof Panel Locator Replacement - Rear