Envoy 4WD V8-5.3L VIN M (2005)
3. Remove the strap (1) from the rear seat cushion latch (2).
4. Remove the 3 bolts securing the rear seat cushion latch to the seat pan.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the 3 bolts securing the rear seat cushion latch to the seat pan.
Tighten the rear seat cushion latch release bolts to 10 N.m (88 lb in).
2. Install the small loop (1) onto the rear seat cushion latch (2).
3. Install the strap through the opening in the seat pan.
4. Install the rear-seat cushion cover and the pad.
5. Install the rear seat cushion assembly to the vehicle.
Seat Cushion Outer Trim Panel Replacement
Seat Cushion Outer Trim Panel Replacement
Removal Procedure
1. Remove the trim panel from the power seat by performing the following:
1. Remove the 3 seat switch bezel mounting screws.
