Envoy 4WD V8-5.3L VIN M (2005)
5. Install the outboard brake pad.
6. Rotate the brake caliper down into position.
7. Notice: Refer to Fastener Notice in Service Precautions.
Install the lower brake caliper guide pin bolt.
Tighten the brake caliper guide pin bolt to 42 Nm (31 ft. lbs.).
8. Install the tire and wheel assembly.
9. Lower the vehicle. Refer to Vehicle Lifting.
10. Fill the brake master cylinder reservoir.
11. Caution: Refer to Firm Brake Pedal Caution in Service Precautions.
Pump the brake pedal slowly and firmly to seat the brake pads.
12. Burnish the new brake pads.