Envoy 4WD V8-5.3L VIN M (2005)
![background image](/gmc/envoy_4wd/v8-5.3l_vin_m/Page-1678001.png)
Brake Hose/Line: Service and Repair
Brake Hose Replacement - Front
Brake Hose Replacement - Front
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Service Precautions.
Removal Procedure
1. Remove the brake hose retaining bolt from the frame.
2. Important: Install a rubber cap or plug the exposed brake pipe fitting ends will prevent brake fluid loss and contamination.
Install a rubber cap or plug on the brake pipe fitting.
3. Remove the brake hose bolt from the brake caliper assembly.
4. Remove the brake hose from the vehicle.
5. Important: The metal gaskets may be stuck to either the brake caliper or the brake hose end. Ensure that these gaskets are removed from the
brake hose end and the brake caliper.
Remove and discard the copper gaskets.