Envoy 4WD V8-5.3L VIN M (2005)
Parking Brake Lever: Service and Repair
Park Brake Lever Assembly Replacement
Removal Procedure
1. Remove the floor console.
2. Disable the Park Brake Automatic Adjuster.
3. Raise and suitably support the vehicle.
4. Disconnect the park brake cables from the equalizer.
5. Lower the vehicle.
6. Disconnect the electrical connector from the park brake warning lamp switch.
7. Remove the remaining park brake lever retaining nut.
8. Remove the park brake lever assembly from the vehicle.
Installation Procedure
