Envoy 4WD V8-5.3L VIN M (2005)
![background image](/gmc/envoy_4wd/v8-5.3l_vin_m/Page-595003.png)
5. Rotate the crankshaft until 2 opposing flywheel bolt holes are parallel to the oil pan surface.
Important: The tapered legs of the alignment tool must enter the rear cover oil seal bore.
6. Install J 41476 and bolts onto the rear of the crankshaft.
7. Notice: Refer to Fastener Notice in Service Precautions.
Tighten J 41476 mounting bolts until snug. Do not overtighten.
1. Tighten the oil pan-to-rear cover bolts to 12 Nm (106 inch lbs.).
2. Tighten the engine rear cover bolts to 25 Nm (18 ft. lbs.).
8. Remove J 41476.
9. Install a NEW crankshaft rear oil seal.
10. Install the engine flywheel.