Envoy 4WD V8-5.3L VIN M (2005)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Intake Manifold Replacement
Removal Procedure
1. Disconnect the negative battery cable.
2. Important: The intake manifold, throttle body, fuel rail, and injectors may be removed as an assembly. If not servicing the individual
components, remove the manifold as a complete assembly.
Remove the air cleaner outlet duct.
3. Relieve the fuel system pressure.
4. Disconnect the air conditioning (A/C) compressor pressure switch electrical connector (2).
5. Remove the harness clip (1) from the cylinder head.