Envoy 4WD V8-5.3L VIN M (2005)
Turn Signal Switch: Service and Repair
Multifunction Turn Signal Switch Housing Replacement
Removal Procedure
1. Caution: Refer to Restraint Systems Caution in Service Precautions.
Disable the Restraint Systems. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.
2. Remove the steering wheel from the column.
3. Remove the ignition lock cylinder case assembly.
4. Remove the turn signal and multifunction switch assembly.
5. Slide the turn signal switch housing off of the steering column shaft assembly.
Installation Procedure