Envoy 4WD V8-5.3L VIN M (2005)
2. Install the inboard rear seat back cushion latch cover with 3 screws.
Tighten the rear seat back cushion latch cover screws to 2 N.m (18 lb in).
Seat Belt Buckle Pretensioner
SEAT BELT BUCKLE PRETENSIONER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front seat assembly.
2. Disconnect the seat belt reminder wiring harness (3) on the driver's seat.
3. Remove the nut (1) which retains the seat belt buckle to the seat assembly.
4. Remove the seat belt buckle from the seat assembly.
INSTALLATION PROCEDURE
1. Install the seat belt buckle to the seat assembly.
2. Install the nut (1) which retains the seat belt buckle to the seat assembly.
Tighten the front seat belt buckle nut to 52 N.m (38 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.