Envoy 4WD V8-5.3L VIN M (2005)
Control Arm: Service and Repair
Front
Upper Control Arm Replacement
Upper Control Arm Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the upper ball joint to upper control arm pinch bolt and nut.
4. Disconnect the upper control arm from the steering knuckle.
5. Disconnect the ABS wheel speed sensor wiring harness from the upper control arm.
6. If removing the left side, remove the battery tray.
7. Gently pry out on inner fender body panel to access forward facing bolt.