Envoy 4WD V8-5.3L VIN M (2005)
Transfer Case Actuator: Service and Repair
NVG 126-NP4
Transfer Case Motor/Encoder Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the fuel tank shield, if equipped.
3. Disconnect the motor/encoder electrical connector (1).
4. Remove the motor/encoder mounting bolts.
5. Remove the motor/encoder assembly.
6. Important: When replacing the encoder rotary position sensor follow steps (6-10). The rotary position sensor is circular with 3 contacts on one