Envoy 4WD V8-5.3L VIN M (2005)
4. Install the rear propeller shaft.
5. Inspect the transfer case fluid level.
6. Lower the vehicle. Refer to Vehicle Lifting.
Transfer Case Input Shaft Seal Replacement
Transfer Case Input Shaft Seal Replacement
Tools Required
^
J42738 Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case assembly.
3. Notice: Refer to Transfer Case Seal Removal Notice in Service Precautions.
Notice: Do not damage the sealing surfaces of the transfer cases or the shafts when prying the seals for removal. Damaging the sealing surface
may cause leakage or require replacement of the damaged component.
Insert a flat-bladed screw driver between the input shaft seal and the transfer case.
4. Pry the front input shaft seal from the transfer case.
5. Remove the front input shaft seal.
Installation Procedure