Envoy 4WD V8-5.3L VIN M (2005)
INSTALLATION PROCEDURE
1. Insert the open end of the wiper blade element (3) into the bottom claws of the wiper blade (2).
IMPORTANT: Keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to
contact the metal spline of the wiper blade element.
2. Guide the wiper blade element (3) through the wiper blade (1) claw sets.
3. Engage the bottom claw (2) of the wiper blade (1) into the notches in wiper blade element (3).
4. Install the wiper blade onto the wiper arm.
Blade Element Cleaning
BLADE ELEMENT CLEANING
1. Lift the wiper blade assemblies off of the windshield glass.
2. Clean the wiper blade element with a clean cloth saturated with full strength washer solution.
3. Rinse the wiper blade assemblies with water.
4. Place the wiper blade assemblies back onto the windshield glass.
Wiper Arm Blade Replacement - Rear
WIPER ARM BLADE REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Lift the wiper arm off the park ramp.
IMPORTANT: Do not allow the wiper arm to fall back and strike the liftgate.
2. Push in the locking tab of the wiper blade clip and pull downward on the wiper arm blade.
3. Remove the wiper blade from the inside radius of the wiper arm.
4. Bring the wiper arm out through the opening in the wiper blade.