Envoy 4WD V8-5.3L VIN P (2004)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Trim Panel Replacement - Endgate (Envoy XUV)
Trim Panel Replacement - Endgate (Envoy XUV)
Removal Procedure
1. Remove the 6 screws that retain the panel to the endgate.
2. Remove the endgate panel from the vehicle
Installation Procedure
1. Position the endgate panel onto the endgate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 6 endgate panel screws retaining the panel to the endgate.
Tighten the endgate panel screws to 4 N.m (35 lb in).