Envoy 4WD V8-5.3L VIN P (2004)
1. Position the garnish molding (1) to the vehicle.
2. Align the locating fingers to the corresponding holes in first pillar.
3. Starting at the top of the garnish molding, seat the attachment clips that retain the garnish molding to the first pillar.
Jack and Tool Stowage Container Bracket Replacement (Envoy XUV)
Jack and Tool Stowage Container Bracket Replacement (Envoy XUV)
Removal Procedure
1. Remove the jack stowage cover.
2. Remove the nut (3) retaining the tool package (4) to the jack bracket.
3. Remove the nuts (1) retaining the jack bracket to the floor studs.
4. Remove the jack bracket from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.