Envoy 4WD V8-5.3L VIN P (2004)
1. Fold the mid-gate to the down position.
2. Install the alignment tabs in the holes of the upper lock pillar trim panel.
3. Install the trim panel retaining clips to the lock pillar by pressing firmly.
4. Install the rear door sill plate.
5. Install the jack stowage cover.
6. Install the rear floor trim cover.
Trim Panel Replacement - Body Lock Pillar Upper (Envoy XUV)
Trim Panel Replacement - Body Lock Pillar Upper (Envoy XUV)
Removal Procedure
1. Remove the lower body lock pillar trim panel.
2. Remove the rear seat belt lower anchor bolt.
3. Pull the trim panel away from the lock pillar to disengage clips.
4. Pull the seat belt webbing through the slot in the panel to remove.
5. Remove the trim panel from the vehicle
Installation Procedure