Envoy 4WD V8-5.3L VIN P (2004)
6. Remove the seat cover J-strips (1) from the seat cushion trim panel (2).
7. Remove the screws securing the seat cushion trim panel to the seat frame.
8. Remove the seat cushion trim panel.
INSTALLATION PROCEDURE
1. Install the screws securing the seat cushion trim panel to the seat cushion assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat cushion trim panel screws to 2 N.m (18 lb in).
2. Install the seat cover J-strips (1) to the seat cushion trim panel (2).