Envoy 4WD V8-5.3L VIN P (2004)
1. Install the latch assembly to the latch bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws retaining the latch assembly to the latch bracket.
Tighten the latch screws to 12 N.m (106 lb in).
3. Connect the electrical connector to the latch assembly.
4. Install the latch bracket assembly to the end gate.
5. Install the bolts retaining the latch assembly bracket to the end gate.
Tighten the latch bracket bolts to 25 N.m (18 lb ft).