Envoy 4WD V8-5.3L VIN P (2004)
1. Install the fan and the shroud.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the mounting bolts to the upper fan shroud.
^
Tighten the bolts to 28 Nm (21 ft. lbs.).
3. Using J 46406 install the fan clutch to the water pump.
4. Connect the fan clutch electrical connector.
5. Install the inlet radiator hose.
6. Install the air resonator assembly.
7. Install the air cleaner assembly.
8. Fill the cooling system.
