Envoy 4WD V8-5.3L VIN P (2004)
![background image](/gmc/envoy_4wd/v8-5.3l_vin_p/Page-1797004.png)
^
The pressure hose O-rings
^
The gear cylinder line O-rings
^
The reservoir to pump O-ring
9. Repeat the bleed procedure from the beginning.
10. Drive the vehicle approximately 16 km (10 miles) in order to warm the system to operating temperature. Evaluate vehicle on a smooth flat surface.
11. Verify the following conditions:
^
There is smooth power assist.
^
The vehicle operates quietly.
^
The pump maintains the proper fluid level.
^
There is not any leaking in the steering system.
^
The fluid is free of foam or discoloration.