Replacing Power Steering Gear on 2004 Envoy 4WD V8-53L VIN P
10. Install the lower intermediate shaft retaining bolt to the power steering gear.
Tighten the lower intermediate shaft pinch bolt to the power steering gear to 40 Nm (30 ft. lbs.).
11. Connect the outer tie rods to the steering knuckles.
12. Install the outer tie rods to steering knuckles retaining nuts.
Tighten the outer tie rods to steering knuckles retaining nuts to 45 Nm (33 ft. lbs.).
13. Install the tires and wheels.
14. Remove the drain pan from under the vehicle.
15. Lower the vehicle.
16. Bleed the power steering system.
17. Adjust the front toe.