Envoy 4WD V8-5.3L VIN P (2004)
Important: The boot (1) must not be twisted, puckered or out of shape in any way. If the rack and pinion boot (1) is not shaped properly, adjust by
hand before installing the boot clamps (3,4). Be sure arrows on the boot (1) align with range on the gear housing.
6. Crimp the large seal retaining clamp (4) on boot (1) with J22610.
7. Crimp the small seal retaining clamp (3) to inner tie rod assembly (2) with J22610.
8. Install the rack and pinion gear.
9. Install the outer tie rod.