Envoy 4WD V8-5.3L VIN P (2004)
Caution: Refer to Glass and Sheet Metal Handling Caution in Service Precautions.
Important: Keep the cutting edge of the tool against the window. Do this from inside the vehicle.
3. This will allow the urethane adhesive to be separated from the window.
*
Leave a base of urethane on the pinch-weld flange.
*
The only suitable lubrication is clear water.
*
Use J 39032 or equivalent in order to remove the window.
4. With the aid of an assistant, remove the quarter window (3) from the opening.
Installation Procedure
1. Install the body side stationary window (3) into the opening.
2. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.