G 1500 1/2 Ton Van V8-305 5.0L VIN H TBI (1995)
![background image](/gmc/g_1500_1/2_ton_van/v8-305_5.0l_vin_h_tbi/Page-1796002.png)
Fig. 14 Stub shaft torque reading
7. Using an inch-pound torque wrench and a 12-point deep socket, measure torque required to turn stub shaft. Take reading with handle of torque
wrench near vertical position. Turn stub shaft to right stop, then back 1/4 turn at an even rate. Record torque reading.
8. Torque reading should be 4-10 inch lbs. If not, adjuster plug may not be tightened properly or may have turned during adjuster plug nut
installation. Thrust bearings and races may also be damaged.