G 3500 1 Ton Van V6-262 4.3L (1985)
Fig. 12 Installing mixture control solenoid gauge tool. V6-262 w/E4ME or E4MED carburetor
Fig. 13 Adjusting mixture control solenoid. V6-262 w/E4ME or E4MED carburetor
MC SOLENOID ADJUSTMENT
1.
Remove carburetor air horn, solenoid adjusting (lean mixture) screw, rich limit stop, MC solenoid plunger, primary metering rods and springs,
plastic filler block and MC solenoid, Fig. 11.
2.
Check MC solenoid bore or plunger for wear, metering rods for incorrect part number, sticking or improper installation and jets for presence of