G 3500 1 Ton Van V6-262 4.3L (1985)
Wiper Switch: Service and Repair
In-Column Switch Applications
Switch Removal
Typical Steering Column Image Shown For Illustrative Purposes Only. Your Column Will Differ.
NOTE: The column mounted wiper switch is operated by rotating the turn signal lever or the combination turn signal/cruise control switch (if
equipped). Refer to the article about removing the turn signal/cruise control lever if it becomes necessary to completely remove the turn signal/cruise
control switch and harness.
REMOVE OR DISCONNECT
1. Disconnect the turn signal/cruise control harness connector at the bottom of the steering column.
2. Remove turn signal lever by pulling it out of the detent retaining clip inside the steering column. Hang the lever from the harness while
disassembling the rest of the column.