G 3500 1 Ton Van V8-350 5.7L VIN L 4-bbl (1985)
![background image](/gmc/g_3500_1_ton_van/v8-350_5.7l_vin_l_4-bbl/Page-1051001.png)
Wheel Bearing: Adjustments
Front
Two Wheel Drive - 2WD
FRONT WHEEL BEARINGS ADJUSTMENT
1.
While rotating wheel forward, torque spindle nut to 12 ft. lbs.
2.
Back off nut until ``just loose'' then hand tighten nut and back it off again until either hole in spindle lines up with hole in nut. Do not back off nut
more than 1/2 flat.
3.
Install new cotter pin. With wheel bearing properly adjusted, there will be .001---.005 inch endplay.
Four Wheel Drive - 4WD
For Front Wheel Bearing Adjustment Procedures on four wheel drive models refer to Locking Hub/Adjustments.