G 3500 1 Ton Van V8-379 6.2L DSL VIN J FI (1992)
2.
Measure the distance between the lower part of the hinge assembly (Figure # 2, Item 1) and the lower part of the door/body sheet metal (Figure #
2, Item 3). Record this information for use during installation of the new hinge. (Refer to Figure # 2, Item 2).
3.
Mark the hinge presently installed on both the door and the body side with a grease or lead pencil (Figure # 3, Item 2). For the side and back cargo
doors, the hinges are installed inside the door or body sheet metal. This mark should indicate the outline of the door/body skin to hinge
relationship. For the front (driver/passenger) door alignment, mark the old hinge location to body prior to removing doors. This will allow for a
starting point for door adjustment.
4.
Remove the hinge bolts from both the door and body sides. Remember to do 1 hinge at a time. The door assembly may need to be supported at this