G 3500 1 Ton Van V8-379 6.2L DSL VIN J FI (1992)
^
Clamp J 9396 in a vise.
Removing The Shaft Nut
^
Compressor to J 9396. Secure with thumb screws.
1. Shaft nut (1) with 9399-A.
^
Hold the clutch plate and Hub assembly (2) with J 25030-A.
2. Clutch plate and hub assembly.
Removing The Clutch Plate And Hub Assembly
^
Thread J 9401-B into the clutch plate and hub (2) (figure 3).
^
Hold the body of J 9401-B with a wrench and tighten the center screw into the remover body.
2. Shaft key (36).
^
Retain the shaft key (36) if usable.
Inspect
^
All parts and replace as necessary.