G 3500 1 Ton Van V8-454 7.4L (1989)
![background image](/gmc/g_3500_1_ton_van/v8-454_7.4l/Page-1464002.png)
Fig. 1 Exploded view of power steering gear
Fig. 2 Rack piston plug removal
Fig. 3 Bearing removal
Refer to Fig. 1, when performing the following procedures.
1.
Pry retaining ring out of housing groove with a screwdriver.
2.
Turn stub shaft to the left until plug on opposite end is forced out of cylinder, then remove seal.
3.
Remove plug from rack piston, Fig. 2.