G 3500 1 Ton Van V8-454 7.4L VIN N TBI (1995)
latch.
2.
Remove the rear latch-to-door crews.
3.
Remove the latch from the door through the access hole.
Installation Procedures
Rear Door Latch:
1.
Install new latch assembly through the access hole.
2.
Line up the latch assembly to door holes and install screws. Torque screws to 8-15 Nm (6-11 lb/ft).
3.
Install upper and lower lock rods to the latch assembly. Push lock rods into the latch retaining holes. Pivot retaining clips onto lock rod assemblies.
Trim Panel:
1.
Install trim panel to door.
2.
Install and tighten trim panel screws.
3.
Install the inside door handle cover (Figure 1, Item 4), inside door handle (Item 3), door handle screw (Item 2), and lock knob (Item 1).
4.
Install Campaign Identification Label.
Parts & Warranty Information
PARTS INFORMATION
Parts are to be obtained from General Motors Service Parts Operation (GMSPO). To ensure that these parts will be obtained as soon as possible, they
should be ordered from GMSPO on a C.I.O. order with no special instruction code but order under an advise code (2). All Goodwrench parts system test
dealers should order on a "VIP" order.
Part Number
Description
Quantity
14048271
Latch, Side Sliding Door
1
WARRANTY INFORMATION
Dealers should submit an accurately filled out Warranty Repair Order on each vehicle completed under this campaign.
Campaign ID Label
Each vehicle corrected in accordance with the instructions outlined in this product campaign bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and five (5) digit dealer code of the dealer performing the campaign service. This
information must be inserted with a typewriter or a ball point pen. This label is to be used in conjunction with the clear protective plastic cover provided
with the Campaign Identification Labels.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean, dry surface.
Additional Campaign Identification Labels and covers are available in sheets of 49 by calling VISPAC Incorporated at 1-800-269-5100 (Monday
through Friday, 8:00 a.m. to 4:30 p.m. EST).
Administrative Procedure
Procedures covering this campaign are outlined in Section V of your dealership's "GMC Truck Warranty Claims Processing Manual" # P9119 Rev. 2/94.
Owner Letter
Dear GMC Truck Customer: