K 1500 Truck 4WD V8-305 5.0L (1985)
Compressor Pulley: Service and Repair
Removal
Fig. 19 Removing pulley retaining ring
Fig. 20 Removing pulley & bearing
1.
Remove clutch plate and hub.
2.
Remove pulley retainer ring, Fig. 19.
3.
Place puller pilot Fig. 20, over end of shaft. It is important that puller pilot be used to prevent internal damage to compressor when
removing pulley. Puller should never be used directly against drilled end of shaft.
4.
Remove pulley and bearing, Fig. 20.