K 1500 Truck 4WD V8-350 5.7L (1986)
Fig. 5 Replacing coil housing retaining ring
4.
Remove coil housing retainer ring, Fig. 5.
5.
Remove clutch coil housing assembly.
Installation
Fig. 5 Replacing coil housing retaining ring
1.
Position coil and housing assembly on compressor front head casting so electrical terminals line up with marks previously scribed on compressor.
2.
Align locating extrusions on coil housing with holes in front head casting.
3.
Install coil housing retainer rings with flat side of ring facing coil, Fig. 5.
4.
Install pulley and bearing assembly.
5.
Install clutch plate and hub.
