K 1500 Truck 4WD V8-379 6.2L DSL (1989)
Caliper Mounting Bolts
3.
Push mounting bolts through to engage holes in the outboard ears. Then thread mounting bolts into bracket.
4.
Torque mounting bolts to 38 Nm (28 ft lb).
5.
If brake hose was removed, reconnect it and bleed the brakes.
6.
Replace front wheels, lower vehicle and add brake fluid to master cylinder to bring level to 1/4 inch from top.
WARNING: Before moving vehicle, pump brake pedal several times to be sure it is firm. Do not move vehicle until a firm pedal is
obtained.