K 1500 Truck 4WD V8-379 6.2L DSL (1989)
Figure 1
7.
Make the following connections (see Figure 1)
^
Red wire to terminal E of high blower motor relay connector and to the junction block connection located on the cowl
^
Black wire to blower motor case mounting bolt for chassis ground. Choose the nearest bolt and scrape lightly around the bolt hole to assure a
good ground.
^
Remaining end of black wire to terminal A of high blower motor relay connector
^
Brown wire to terminal D high blower relay connector and terminal 52 of resistor block.
^
Remaining orange wire (ignition lead) to terminal C of high blower relay connector.
8.
Firmly install the high blower connector to the high blower motor relay.