K 1500 Truck 4WD V8-4.8L VIN V (1999)
6. Remove the caliper mounting bolts.
7. Remove the caliper.
8. Inspect the caliper assembly.
INSTALLATION PROCEDURE
1. Install the caliper.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the caliper mounting bolts.
-
Tighten the caliper guide pin bolts to 108 Nm (80 ft. lbs.).
3. Connect the brake hose at caliper by installing the inlet fitting bolt.
-
Tighten the inlet fitting bolt to 52 Nm (38 ft. lbs.)
4. Bleed the brakes.
5. Install the tire and wheel assembly.
6. Remove the safety stands.
7. Lower the vehicle.
Brake Caliper Replacement (Rear)
REMOVAL PROCEDURE
1. Remove 2/3 of the brake fluid from the master cylinder.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.