K 1500 Truck 4WD V8-4.8L VIN V (1999)
![background image](/gmc/k_1500_truck_4wd/v8-4.8l_vin_v/Page-3560001.png)
Tail Lamp: Service and Repair
Tail/Turn Signal Lamp Replacement (Pickup)
REMOVAL PROCEDURE
1. Ensure the headlamp switch is in the OFF position.
2. Remove the 2 screws retaining the tail/turn signal lamp assembly to the body.
3. Identity the bulb in need of replacement.
-
The top bulb is a parking lamp.
-
The center bulb is a parking, brake, and a turn indicator lamp.
-
The lower bulb is a backup lamp.
4. Turn the socket assembly.
5. Remove the socket assembly from the housing.
INSTALLATION PROCEDURE
1. Turn the socket.
2. Lock the socket in place.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the tail/turn signal lamp assembly to the vehicle with the 2 screws.
Tighten
Tighten the screws to 2 N.m (18 lb. in).