K 1500 Truck 4WD V8-4.8L VIN V (1999)
Pressure Regulating Solenoid: Service and Repair
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission oil pan and the filter.
Refer to AT Fluid/Filter Changing
3. Remove the reverse boost valve bushing retainer ring (1).
4. Remove the following from the reverse boost valve cylinder:
^
The reverse boost valve bushing
^
The reverse boost valve
^
The pressure regulator spring retainer
^
The pressure regulator spring
^
The pressure regulator valve
^
The reverse boost valve bushing
Installation Procedure
^
Tools Required
-
J 36850 TRANSJEL