K 1500 Truck 4WD V8-5.3L VIN T (2000)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Installation
Crankshaft Rear Oil Installation
Tools Required
J 41479 - Crankshaft Rear Oil Seal Installer
Important:
^ Do not lubricate the oil seal inside diameter (ID) or the crankshaft surface.
^ Do not use the crankshaft rear oil seal again.
1. Lubricate the outside diameter (OD) of the oil seal (1) with clean engine oil.
DO NOT allow oil or other lubricants to contact the seal surface.
2. Lubricate the rear cover oil seal bore with clean engine oil.
DO NOT allow oil or other lubricants to contact the crankshaft surface.