K 1500 Truck 4WD V8-5.3L VIN T (2000)
5. Pull the connection apart.
NOTE: Refer to Quick-Connect Fittings Notice in Cautions and Notices.
6. Use a clean shop towel in order to wipe off the male pipe end.
7. Inspect both ends of the fitting for dirt and burrs. Clean or replace the components as required.
INSTALLATION PROCEDURE
CAUTION: Refer to Fuel Pipe Fitting Caution in Cautions and Notices.
1. Apply a few drops of clean engine oil to the male pipe end.
2. Push both sides of the fitting together in order to snap the retaining tabs into place.
3. Once installed, pull on both sides of the fitting in order to make sure the connection is secure.