K 1500 Truck 4WD V8-5.3L VIN T (2000)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Drain the engine coolant. Refer to Draining and fitting Cooling System in Engine Cooling.
3. Lower the vehicle.
4. Disconnect the electrical connector from the Engine Coolant Temperature (ECT) sensor.
NOTE: Refer to Handling Coolant Sensor Notice in Cautions and Notices.
5. Remove the ECT sensor.
INSTALLATION PROCEDURE
NOTE: Refer to Handling Coolant Sensor Notice in Cautions and Notices.