gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Deployment Procedures|Page 13795 > < Deployment Procedures|Page 13793
Page 4
background image

22. Connect the SIR deployment harness wires to the power source.

23. Disconnect the SIR deployment harness from the power source after the air bag deploys.
24. Seat one banana plug into the other in order to short the deployment harness leads.
25. If the air bag did not deploy, disconnect the adapter and discontinue the procedure. Contact the Technical Assistance Group. Otherwise, proceed to

the following steps.

CAUTION:  Refer to Deployed inflator modules are hot Caution in Cautions and Notices.

26. Put on a pair of shop gloves.
27. Disconnect the pigtail adapter from the inflator module as soon as possible.
28. Inspect the pigtail adapter and the SIR deployment harness. Replace as needed.
29. Dispose of the deployed module through normal refuse channels.
30. Wash hands with a mild soap.

Inflatable Restraint Steering Wheel Module

TOOLS REQUIRED

^

J 38826 SIR Deployment Harness

^

An appropriate pigtail adapter

Deployment Procedures|Page 13795 > < Deployment Procedures|Page 13793