K 1500 Truck 4WD V8-5.3L VIN T (2000)
Install the check valve (1) using a 3/8 inch diameter piece of tubing 100 mm (4 inches) long to drive into the steering gear housing (2).
Steering Gear Cylinder Pipe Assemblies/O-Ring Seals Replacement
Disassembly Procedure
1. Loosen both cylinder line fittings (1) on the cylinder end of the gear assembly.
2. Loosen both fittings on the cylinder line assemblies (3) at the valve end of the gear assembly.
3. Remove both cylinder line assemblies (1) from the rack and pinion gear assembly (2).