K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
6. Remove the quarter panel trim from the vehicle.
Lift the quarter panel to release the quarter panel from the vehicle.
INSTALLATION PROCEDURE
1. Install the quarter panel trim to the vehicle.
2. Install the quarter panel trim screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Install the door sill plate.
4. Install the garnish molding.
5. Install the Third Pillar trim panel.
6. Install the rear seat.
Rear Side Door Trim Panel Replacement
TRIM PANEL REPLACEMENT - SIDE REAR DOOR
REMOVAL PROCEDURE
1. Remove the door handle bezel.
2. Remove the window-regulator handle, if equipped.
3. Remove the manual lock lever from the trim panel using a flat-bladed tool.