K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
Important: Ensure that the alignment is proper.
3. Tighten the tie bar bolts.
Tighten the tie bar bolts to 9 N.m (80 lb in).
4. Install the upper headlamp housing support screws.
Tighten the upper headlamp housing support screws to 9 N.m (80 lb in).
5. Install the radiator mounting bolts onto the rear side of the tie bar.
Tighten the radiator mounting bolts to 25 N.m (18 lb ft).
6. Install the tie bar to the radiator brace bolts (1). Access the bolts from the rear of the tie bar using an extension.
Tighten the radiator brace bolts to 9 N.m (80 lb in).
7. Install the upper fan shroud.