K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor Replacement
Crankshaft Position (CKP) Sensor Replacement
REMOVAL PROCEDURE
IMPORTANT:Perform the CKP System Variation Learn Procedure whenever the crankshaft position sensor is removed or replaced.
1. Remove the starter.
2. Disconnect the crankshaft position (CKP) sensor electrical connector.
Crankshaft Position Sensor (CKP)
3. Clean the area around the CKP sensor before removal in order to avoid debris from entering the engine.
4. Remove the CKP sensor bolt.
5. Remove the CKP sensor.